Subject Repository
Electrical Engineering Mcqs
Showing 1421 – 1440 of 3,699 verified multiple choice questions with answers and explanations.
Q1421NTS / FPSC / PPSC
In Colpitt’s oscillator, feedback is obtained___________?
Q1422NTS / FPSC / PPSC
Six resistors are in parallel. The two lowest-value resistors are both 1.2 kΩ. The total resistance_____________?
Q1423NTS / FPSC / PPSC
The following resistors are in parallel across a voltage source: 220Ω , 470Ω , and 560Ω . The resistor with the least current is______________?
Q1424NTS / FPSC / PPSC
In a certain three-branch parallel circuit, R1 has 12 mA through it, R2 has 15 mA through it, and R3 has 25 mA through it. After measuring a total of 27 mA, you can say that____________?
Q1425NTS / FPSC / PPSC
For an oscillator to properly start, the gain around the feedback loop must initially be_________?
Q1426NTS / FPSC / PPSC
Five 100 Ω resistors are connected in parallel. If one resistor is removed, the total resistance is______________?
Q1427NTS / FPSC / PPSC
One condition for oscillation is_____________?
Q1428NTS / FPSC / PPSC
The total resistance of a parallel circuit is 50 Ω. If the total current is 120 mA, the current through the 270 Ω that makes up part of the parallel circuit is approximately_______________?
Q1429NTS / FPSC / PPSC
The crystal oscillator frequency is very stable due to___________of the crystal?
Q1430NTS / FPSC / PPSC
In a phase shift oscillator, the frequency determining elements are _______________?
Q1431NTS / FPSC / PPSC
Hartley oscillator is commonly used in______________?
Q1432NTS / FPSC / PPSC
A 470 Ω resistor, a 220 Ω resistor, and a 100 Ω resistor are all in parallel. The total resistance is approximately________________?
Q1433NTS / FPSC / PPSC
Four equal-value resistors are connected in parallel. Ten volts are applied across the parallel circuit and 2 mA are measured from the source. The value of each resistor is______________?
Q1434NTS / FPSC / PPSC
In an LC oscillator, the frequency of oscillator is____________L or C?
Q1435NTS / FPSC / PPSC
When a 1.6 kΩ resistor and a 120Ω resistor are connected in parallel, the total resistance is____________?
Q1436NTS / FPSC / PPSC
An ammeter has an internal resistance of 50 Ω. The meter movement itself can handle up to 1 mA. If 10 mA is applied to the meter, the shunt resistor, RSH1, is approximately___________?
Q1437NTS / FPSC / PPSC